Preparation
1.Make sure that your camera supports audio function.
2.External active microphone.
3.Client software such as iVMS-4200 & iVMS-4500
Note:
1.HIKVISION cameras which have –S in their names support audio function.
2.Some cameras have internal microphone such like DS-2CD2412F-I (W), for these cameras, please skip next section(How to plug active microphone to IPC)
How to plug active microphoneto IPC
1.HIKVISION cameras have different audio interface. Below are two examples.
(1) 21XX Network Camera. In this picture below, the audio interface is 11.
Note:
Active microphone needs external power supply.
3.Take DS-2FP2020, for instance. Connect Red wire with Positive power supply;connect White wire with Audio in interface; and then connect Black wire with Negative power supply and Audio GND interface together.
How to start audio live view & playback
1.In the camera web interface, go to Configuration -Video/Audio and set the video type to Video & Audio, and then go to Audio tab to set audio input to LineIn. If needed,you may enable environmental noise filter.
2.Go to Live View tab, enable the audio output by clicking icon and adjust its volume.
3.Connect the camera with a NVR, and make sure its foot ages have beenstored into the NVR.
4.In the NVR web interface, go to Playback tab, enable the audio output by clicking icon and adjust its volume.
5.You may realize audio live view & playback in iVMS client software as well.