I will show you step-by-step how to VivoTek (iViewer) DVR connect to the internet and view through mobile app. Just get your mobile phone and follow the instructions.
VivoTek (iViewer) Cloud app is a free mobile app that lets you view video from your security cameras on compatible smartphones and tablets from anywhere in the world over the internet.
VivoTek (iViewer) Cloud app is compatible with iPhone, iPad, and android devices.
1. Tap the VivoTek (iViewer) Cloud icon to open the app.
2. Swipe to the left to read through these pages. The Tutorial pages will not start the next time you use the iViewer.
3. Tap the Side panel button.
4. Tap on ADD DEVICES.
4. Tap on ADD FROM LIST. The iViewer will automatically scan the local network for all servers and cameras. (Suppose that your cell phone is connected to a wireless AP that is connected to the local network where your cameras reside).
By default, the video stream with the smallest resolution on each camera is selected for its lower resolution and frame rate, e.g., 176×144 and 5fps, and is recommended.
It will take several seconds to search for devices in the local network. If necessary, scroll down to refresh the search process.
After a short while, devices discovered on the local network will be listed.
Single tap to select a device, and then tap on the Add button below. You may also tap the Add all button on the upper right. Repeat the process to add all devices your prefer.
Your devices should be enlisted in a short while.
A secure connection prompt will appear. Select Yes to proceed with HTTPS encrypted connection.
To utilize a secure connection, the associated HTTPS configuration should be pre-configured on the camera, e.g., a self-signed certificate.
If any of the devices comes with a preset password, enter its user name and password (64 digits max.).
You may then select to Apply (apply the credential to a single camera), Apply to All (apply the credential to all cameras), or Skip All (skip and abandon these cameras).
Multiple entry pages will appear if credential is required for multiple devices.
there are multiple devices needing a verification, swipe to the left to move to another device.
Add Devices Manually
You can also tap on the ADD DEVICES MANUALLY, especially if a device comes from the outside of the local network.
Tap to select either a SERVER or an individual CAMERA.
Enter its IP address, communication port [(1~65535), usually not necessary to change)], and the credentials (RFC2396-compliant URL). Tap on the Add button to proceed.
Your devices should be added in a short while.
iViewer Live Screen
That’s it. now you can view Vivotek (iViewer) DVR through your mobile.