This article will show you how to setup EzViz camera remotely using your mobile.
Downloading EZVIZ Mobile APP
Downloading EZVIZ Mobile App for IPhone / Android Users.
Log onto the AppStore.
2. Enter “Ezviz” to search the Ezviz mobile application.
3. Download and install it to your Phone.
4. After installing, tap to run the software.
Registering the Application
When you use the software for the first time, you should register an Ezviz Mobile APP account.
Registering by Mobile Phone Number.
1.Tap the icon to run the software.
2.Tap Terms of Service to read the agreement.
3.Tap New User Registration in the login interface.
Note:By taping on New User Registration, you agree to Ezviz terms of service.
4.Tap Register using Mobile Phone Number.
5.Select a target region in the Region interface.
Notes: •The region cannot be changed once you have selected.•You should select an accurate region. Or it may affect some functions of the software.
6.Tap Finish at the upper-right corner of the interface.
Input your mobile phone number in the Mobile Phone Number interface and tap Get Verification Code. The verification code will be sent to your mobile phone.
Note: You can also tap Region in the Mobile Phone Number interface to change the region.
7.Input the received verification code in the box and tap Next.
Note: The SMS may be delayed. If no messages received, tap Get Again to receive the verification code again.
8.Input a user name and password and confirm password in the next interface.
Tap Finish to complete registering.
Login
1.Tap the icon to run the software.
2.Input the registered user name,E-mail address, or phone number.
And input the password.Or Tap at the bottom of the interface to login to your Ezviz account by linking to
Facebook and/or Google+accounts.
3.Tap Login to enter the main interface.
Adding a Device
Before you start: Power on your camera (mini) and wait for Red & Blue lights to flash on the camera
(This may take about 1 minute)
1.Tap the home icon at the bottom of the interface.
2.In the Home interface, tap the icon + at the upper-right corner.
3.Tap Scan QR Codeto scan the device QR code.
Note: Normally, the QR code is on the back of the device
Or
1) Tap type in the SN serial number of the interface and input the device serial No. manually.
2)Tap the OK to search.
Note: The detectors cannot be added by manually inputting.
2)Type in your Wi-Fi Password and thentap Next.
3)Configure the Time Zone and tap on Finish.
4.In the Results interface, tap Add.5.Enter the device verification code and tap OK.
Notes:
•You can find the device verification code on the device label.
•If you scan the device QR code to add, the verification code entering interface will not be popped up. The QR code includes the verification code information.
Live View
After the device is successfully added.
You can live view the videos from the added devices, control PTZ movement, audio, capture, record and any other operations.
That’s it.