[Guide] AVTECH DVR Online P2P EagleEyes Setup

 This article will show you how to setup AVTECH DVR remotely using your mobile and PC.

EaZy Networking is a free P2P cloud service to connect AVTECH devices to the Internet automatically by plug-and-play, enabling you to check the live view via your mobile device at any time.

Device Management – Add a device

Tap ＋ to add a new device and you’ll see three options: EaZy, QR Code and Manual.

EaZy and QR Code are the options for the AVTECH products which support EaZy Networking. EaZy is used for both recorders and IP cameras while QR Code is used only for recorders.

EaZy Networking is a free P2P cloud service to connect AVTECH devices to the Internet automatically by plug-and-play, enabling you to check the live view via your mobile device or laptop at anytime.

By EaZy Method

Tap Add to add a new device. Then, tap EaZy if the device is configurable with EaZy Networking and you need the administration power for remote access.

Select the device type you have, and follow the onscreen instructions to complete the network setup.

By QR Code

Tap Add to add a new recorder. Then, tap QR Code if the recorder is configurable with EaZy Networking and you do not need any administration power for remote access.

Scan the QR code shown on your recorder, and enter the title of this device and its user name and password.

Make sure you see the device type when you tap Get Type. If not, the device is not connected properly. Then, Tap Apply to complete the process.

NOTE

For the first time to connect your device to the internet, the default user name and password are both admin. If it’s been configured before, make sure you’ve known its current user name and password since they may be changed for security purpose.

By Manual

NOTE

Please configure your device to the Internet first, and you have the access information in hand, i.e. IP address, port number, user name and password.

In the section of REQUIRED, fill in the information needed to access your device (IP Address / Port / Username / Password), and name your device in Title.

Note:

You might see the preview of each channel depending on the model you have.